‍

HANDLING
Please ensure that you are wearing the proper PPE. Please use safety goggles and latex gloves as well as apply the pretreatment in a well-ventilated area to ensure the proper evacuation of fumes.‍

APPLICATION INSTRUCTIONS

1. Lightly saturate a lint-free cloth with BondAid II

2. Wipe the entire substrate surface evenly

a. There is no advantage to heavier applications

3. Allow the solvent to evaporate for 5 minutes at 20°C/50%RH

4. Print on surface

5. Allow 15 minutes post printing before any testing

6. Final results will be best obtained after 24 hours

7. Maximum open time is 48 hours. Do not prep too far in advance.

Always test the results of this product on your specific substrate using your application method prior to using in production.